Odila Auffret Fireplace August 08, 2018 16:18:29
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other.
If you decide that sitting next to the fireplace is the way to go, you will need to make sure you have enough chimney rods to span the entire length of your chimney. As you are sitting next to your fireplace, push your brush up through the flue. Continue to add more brush rods as needed until the brush is at the top of the chimney. As you pull the brush back down, you will need to make a back and forth motion to really scrub the creosote off the walls of the chimney. Be sure to shield your eyes, as some of this loosened creosote may fall into the firebox. If you decide that cleaning your chimney from the top will work better for you, you will need to have a long piece of rope and some type of weight attached to the bottom of the chimney brush. Again, as you work the brush through the chimney, use a back and forth motion to be sure you are scraping off as much creosote as possible. If you do choose to use this method, make sure that you do it with safety precautions in place. Falling off the roof is never a good idea!