Renee Bachelet Fireplace August 04, 2018 00:24:01
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.
You can now enjoy your clean fireplace for the rest of the season, without worrying about flying dust or ash or about a dangerous creosote fire breaking out in the fireplace. Do not forget to close the flue to prevent any drafts and to keep your firebox free from debris. Decorating your fireplace is a pleasure once it is all clean. The fun part is deciding what you will use. How about creating a fresh look for your fireplace by getting a new fireplace screen? There are so many options out there as far as design and style. Some of my favorites are single panel fireplace screens. With a single panel fireplace screen, you do not need to have much room on your hearth. Because it is a flat fireplace screen, it can sit right up against the firebox and takes up very little precious space. As for the design, how about adding the fresh look of spring with a leaf fireplace screen? If you really love that look, you can even get a matching leaf fireplace tool set and log holder to go with it!