Orlina Leloup Fireplace August 27, 2018 15:50:30
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.
The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and don`t threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.