Raison Rousselle Fireplace August 04, 2018 01:01:22
Most houses these days aren`t even built with a fireplace in mind. Housing codes in some cities have put a damper on the installation of traditional wood burning fireplaces. Alternative heating sources that don`t require the collection of wood and the cleanup of ash are another reason why fireplace installation in new homes isn`t so popular. But, fireplaces are so beautiful. They are great for hanging around on cold nights when you want to just spend some quality time with your family. The problem is that installing a traditional wood burning fireplace can cost thousands of dollars. It`s actually somewhere above ten thousand. But, there are cost effective solutions to install a fireplace without the traditional wood burning features that cost so much. Most of this work you can do yourself. But if you have no hope of ever being even an amateur construction worker, then any work you might need done won`t be too expensive to outsource to a contractor.
If you decide that sitting next to the fireplace is the way to go, you will need to make sure you have enough chimney rods to span the entire length of your chimney. As you are sitting next to your fireplace, push your brush up through the flue. Continue to add more brush rods as needed until the brush is at the top of the chimney. As you pull the brush back down, you will need to make a back and forth motion to really scrub the creosote off the walls of the chimney. Be sure to shield your eyes, as some of this loosened creosote may fall into the firebox. If you decide that cleaning your chimney from the top will work better for you, you will need to have a long piece of rope and some type of weight attached to the bottom of the chimney brush. Again, as you work the brush through the chimney, use a back and forth motion to be sure you are scraping off as much creosote as possible. If you do choose to use this method, make sure that you do it with safety precautions in place. Falling off the roof is never a good idea!