Raison Rousselle Fireplace August 04, 2018 01:01:17
Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire. They also use a forced-air system to distribute the wood pellet heat. Pellet-burning appliances are highly efficient, clean burning and environmentally friendly. Pellet stoves burn wood very efficiently and many do not need chimneys. Rather, they can exhaust fumes by venting directly through a wall to the outdoors. Pellet-burning appliances need to be refueled less frequently than most other wood burning appliances. Refueling varies from once a day to twice a week, depending on the model and your heating needs. Most pellet stoves require electricity to operate.
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.