Raison Rousselle Fireplace August 25, 2018 19:44:47
Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality. Even ventless gas fireplace fire boxes come with a spark arrestor curtain, chain-mail screen to add to the illusion of a wood burning fireplace with the convenience of a gas log installation and remote control use. Custom fireplaces will have inconsistencies in width, height and fireplace depth. While fireplace screens are produced in standardized sizes, not all fireplaces will be that exact and the fire-screen may over-shoot the size. Spark arrestor curtains can be custom made for specific rods to fit inside any custom fireplace opening but free standing fireplace screens are available in standard finished and colors.
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.