Home / Fireplace / Electric Fireplace Freestanding / 82 Most Brilliant Ventless Electric Fireplace Fireplace Heater Insert Modern Free Standing Electric Fires Electric Fire Logs Electric Wood Stove Creativity
Patrice Bonnaud Fireplace August 04, 2018 00:21:26
Renters are usually prohibited from making extreme structural changes to their apartments or condos. For this reason, electric fireplaces are the ideal solution for renters looking to add the heat or ambiance of a fireplace to their home. A fireplace that runs on electricity doesn`t require venting, chimneys, or the structural changes that would come with installing a traditional or gas fireplace. Corner electric fireplaces simply plug in to standard outlets. Plus, they are much safer and cleaner than wood-burning or gas fireplaces. Electricity-based fireplaces are a way for people to have a fireplace in their small space, and not lose their security deposit. There are no ashes, soot nor risk of sparks flying out and ruining the carpet. Fireplaces that run on electricity can heat a room up to 400 square feet, and are very cost-efficient. They are a great source of supplemental heat in the winter, and can be run without the heater for warmth and ambiance all year round. Those who live in a smaller space don`t have to go without a fireplace any longer - smaller and corner electric fireplaces are the perfect space-saving solution for any small living space.
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.