Renee Bachelet Fireplace August 25, 2018 19:47:14
Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface. Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools.
This other type of fireplace has one of the most traditional looks. A stone fireplace can look gigantic with large stones reaching up the chimney to the room`s ceiling, or it can look fragile with a white, carved stone fireplace surround. The stone fireplace can fit into any fashion of decorating. It can also bring a natural texture and color into a room. Stone fireplaces are usual in older and newer homes. The size of the fireboxes will establish the size of the fireplace needed. The firebox is the interior where the fire will be burning. Older stone fireplaces did not come with doors, but with screens. Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors.